www.uhasselt.be
DSpace

Document Server@UHasselt >
Research >
Research publications >

Please use this identifier to cite or link to this item: http://hdl.handle.net/1942/3948

Title: TEXTURE ANALYSIS OF MARTENSITIC HOT-WORKED TOOL STEEL H13 COATED WITH TIN BY PHYSICAL VAPOR-DEPOSITION
Authors: QUAEYHAEGENS, Carl
STALS, Lambert
VAN STAPPEN, M
Issue Date: 1991
Publisher: ELSEVIER SCIENCE SA LAUSANNE
Citation: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 139. p. 242-248
Abstract: With a theta-2-theta decoupled X-ray diffractometer, extended with a omega substrate rotation, it is possible to study the preferential orientation (texture) of polycrystalline materials in an experimental set-up which is comparable with the Field-Merchant configuration. After having established the preferential orientation of the substrates, which were made of martensitic hot-worked tool steel H13, they were coated with TiN by physical vapour deposition. Two layer thicknesses were deposited at two different bias voltages. Thin TiN layers with a thickness of 200-300 nm were polycrystalline while coatings with a layer thickness of 1400-1600 nm showed a preferential orientation of the (111) and (220) lattice planes parallel to the substrate surface. The (111) preferential orientation shows a decrease in mosaic spread with increasing bias voltage, but the mosaic spread of the (220) preferential orientation remains unchanged.
Notes: SCI & TECH CTR METAL WORKING IND,DIV SURFACE TREATMENT,B-3590 DIEPENBEEK,BELGIUM.QUAEYHAEGENS, C, LIMBURGS UNIV CENTRUM,INST MAT RES,DIV MAT PHYS,UNIV CAMPUS,B-3590 DIEPENBEEK,BELGIUM.
URI: http://hdl.handle.net/1942/3948
DOI: 10.1016/0921-5093(91)90624-V
ISI #: A1991GB84600042
ISSN: 0921-5093
Type: Journal Contribution
Appears in Collections: Research publications

Files in This Item:

There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.