www.uhasselt.be
DSpace

Document Server@UHasselt >
Research >
Research publications >

Please use this identifier to cite or link to this item: http://hdl.handle.net/1942/25139

Title: Direct printing of (organic) light emitting devices on textile
Authors: Verboven, Inge
Gilissen, Koen
Vandevenne, Glen
Troia, Mariagrazia
Leins, Martina
Walker, Matthias
Schulz, Andreas
Deferme, Wim
Issue Date: 2015
Citation: Aachen-Dresden International Textile Conference (ADITC 2015), Aachen, Germany, 26-27/11/2015
Abstract: Smart textiles with light-emitting properties open a whole new world of innovative textile applications. Besides the use as protective or safety clothing for road workers, police and fire departments, these light-emitting textiles can also be used as indoor and outdoor design. Lighting wallpaper or tiles and textile banners and flags used for advertisement are among this wide variety of applications. Even healthcare applications, such as light therapy are within reach. To achieve light-emitting properties on textiles, (organic) light emitting devices are printed (directly) onto textile substrates. In this work two different approaches are followed: electroluminescent devices (EL devices) and organic light emitting devices (OLEDs). The first approach shows that direct printing of light emitting devices on textiles is possible. These EL devices however still have some downsides such as a high energy consumption and a low flexibility and drapability, due to the thickness (100μm) of the layers. The OLEDs, that form the second approach, are more difficult to apply directly on textiles but are the route ahead for light emitting wearables. These OLEDs are built up out of 4 to 6 very thin layers ending up with a device stack of maximum 0.5 micrometer and therefore maintain the flexibility and drapability of the textile substrate. Further they have a high brightness and a very low power consumption. To protect these devices from fast degradation from contact with oxygen or water vapour, an encapsulation layer will be applied on top. As the roughness of most textile substrates is in the micrometer range, and the thickness of the encapsulation layers and the different layers in the OLED stack are in the nanometer range, it is first important to investigate the influence of different smoothing layers, among which poly-urethane (PU), acrylate and polymethylmethacrylate (PMMA), on their surface properties. As a next step, encapsulation layers will be applied using plasma techniques and their transparency, chemical composition and barrier properties for oxygen and water vapour will be measured. On top of this encapsulation, the OLED stack will be deposited. By using spin coating and evaporation techniques, OLEDs will be fabricated and their resolving light output and luminous efficacy will be measured. To finalize the complete stack, a last encapsulation is applied and the final properties of the device are measured and compared with reference devices on glass substrates. It is shown in this work that light emitting devices can be printed (directly) onto a textile carrier to be used in a wide range of applications.
URI: http://hdl.handle.net/1942/25139
Category: C2
Type: Conference Material
Appears in Collections: Research publications

Files in This Item:

Description SizeFormat
N/A247.67 kBAdobe PDF

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.